Tag Archives: GOZBL

Monarch Airlines to launch East Midlands-Ibiza flights tomorrow, explains how to paint an airliner

Monarch Airlines (London-Luton) is launching two new routes from East Midlands. On May 7 the airline launched its first ever scheduled flight to Malta from East Midlands Airport. The flights will operate twice a week on a Tuesday and Saturday.

Malta is the first of two new routes to launch this summer from East Midlands Airport with Ibiza also launching on May 23.

Video: Monarch makes flying fun for 600 kids:

Copyright Photo: Paul Denton. Airbus A321-231 G-OZBL (msn 864) lands at Geneva in the updated look.

Monarch Airlines: AG Slide Show

What does it take to repaint an airliner? Monarch Airlines explains the process that takes nine days on their excellent Monarch blog:

First step, checks and scaffolding

The first task was to fly Airbus A321 G-OZBZ down to a specialist aircraft painting company in Bournemouth called Airbourne Colours. The A321 would spend about 9 days being stripped down and repainted by a team of 10 to 12 highly experienced specialist painters each with 10 to 20 years experience. The team in Bournemouth would be in constant communication with Monarch operations teams and engineers during this time.

When G-OZBZ first arrived at the painter’s hangar, a Monarch engineer carried out an acceptance check on the aircraft. This check included removal of window wipers and a series of other tasks such as disconnecting batteries.

Next, the painting specialist’s hangar supervisor and a Monarch engineer worked together to check on the condition of the current paintwork and assessed any damage. While this check was carried out, a team put scaffolding into place around the aircraft. There had to be enough scaffolding to give access to every point of the aircraft during the painting process.

Second step, masking and stripping

There are two kinds of paint job that you can give an aircraft – a strip or an abrade (otherwise known as a ‘rub’). A strip involves the use of chemical washes to remove the paint back to bare metal. During a ‘rub’ the aircraft fuselage (the body of the plane) is sanded back to a smooth finish ready to accept paint.

Generally the fuselage and fin are stripped as these are made of metal but the engines and wings and rubbed as they are made of composite materials.

Monarch Airlines aircraft G-OZBZ during repaint - masking

G-OZBZ needed a fuselage strip and repaint, so the next step was to cover or ‘mask’ all the areas which needed to be protected from sanding dust and paint overspray, for example the cockpit and cabin windows. As the wings weren’t being painted (just the ends were to be painted yellow), these were also masked. Masking was also applied to sensitive items such as ports, antennae, aerials and engine intakes.

The metallic areas were then chemically stripped back to bare metal, a process which includes a power wash and alkaline shampoo. The tail fin and engine cowlings (covers) are made of composite materials, so these were abraded, followed by a solvent wash. Once all the paint was removed and sealants checked and repaired or replaced, Monarch engineers carried out a bare metal inspection to check the state of the aircraft before painting commenced.

Monarch aircraft A321 - G-OZBZ during repainting process

 Then, it’s time to paint

After masking, a team of 10 to 12 people hand-sprayed primer to the fuselage.

Monarch G-OZBZ during white paint process

Once the primer was dry, a layer of white paint was applied to the fuselage.

Monarch aircraft G-OZBZ during painting process - white coat

Next, yellow paint was sprayed on to the tail and once dry, the indigo was applied to the underneath of the fuselage and Monarch’s famous spotty M logo was added to the tail.

Monarch aircraft G-OZBZ during painting process

There are a number of mandatory markings and Monarch titles that need to be put on the aircraft. These are a combination of decals (industrial stickers) and paint. The Monarch title for instance was applied by placing a massive spray mask (or stencil) over the fuselage and spraying the mask with paint.

Monarch aircraft G-OZBZ more colours applied

Aircraft paints are designed to be tough in order to withstand extreme environmental conditions as well as corrosion, chemicals, and rain erosion. However, unlike paint you might use to protect your home, aircraft paints also need to be incredibly lightweight and the completed paint job was allowed to be no more than 250 microns thick (0.25mm or about 0.01 inches).

Taking all the primer, white, yellow, purple basecoat and the clear coat together, the total amount of paint used was about 360 litres.

Finally, it’s very important to the safe and efficient operation of commercial aircraft that we know how much everything weighs. When the painting was complete, G-OZBZ was given a ‘calculated reweigh’, which compared the thickness of the new paint to the original paint. These figures were sent to a loadmaster company to produce accurate trim data for the aircraft, which will be used eventually by the pilots and other people in operations.

Thank you Monarch for explaining the process.